How to backup footage to a USB drive

User can back-up any segment of recorded data in a specified time frame. To do so,
connect a USB flash driver to the DVR.

First hit Refresh which will recalculate the available Free Space in your backup device

Then put in your Start time and End time
From =Backup file starting time
To= Backup file ending time
Select the device you want to use, USB/DVDRW as the backup device or (From remote site, the device will be PC.)

Then hit Calculate which will calculate the size of backup file with your data entered
Then hit Start
Start backup operation. Be sure to calculate the size of backup file BEFORE
operating backup.
NOTE! Do not unplug the USB device or turn off the DVR during the backup process to avoid
unrecoverable error. When backup is completed, you need to re-plug in order to insure
proper function.

iFileplayback.exe will be on the drive after you back up, please run .exe file to view data

{ 2 comments… read them below or add one }

John Reilly April 26, 2012 at 10:20 pm

we need help recording to a flash drive


iVigil Tech April 27, 2012 at 1:59 pm

Please check out revised data up above,


Leave a Comment